-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Is there such a thing as soft open hinges
- Thread starter ldoodle
- Start date
Timber ? Plastic ?
A drop down flap gas strut might work
www.debonairjoineryproducts.co.uk
Stay Strut Lift for Drop Down Cabinet Doors - Debonair Joinery Products
Stay Strut Lift for Drop Down Cabinet Doors It provides slow movement when opening cabinets doors. Its mechanism prevents the inert descent of the front. Made of steel, it will be used in drop down flaps with a front height of up to 600 mm. The approximate opening angle of the lift is 90°...
www.debonairjoineryproducts.co.uk
Yeah. With a telescopic ladder.
Was intending to use 18mm ply
My loft ladder , heavy timber used a heavy spring across the hinges to dampen the fall . You can also get hinges designed to allow softer opening .
One example is Hafele Avantos HK.
Used in kitchen cupboards but might be suitable .
www.bullerltd.co.uk
(Easier to get a good finish on mdf )
One example is Hafele Avantos HK.
Used in kitchen cupboards but might be suitable .
Blum Aventos HK-S Set -HK-S (Power Factor: 220-2215)
Blum Aventos HK-S SetCabinet Hinges & Stays / Cabinet Stays & Lifts / Aventos / HK-S (Power Factor: 220-2215)
www.bullerltd.co.uk
My loft ladder , heavy timber used a heavy spring across the hinges to dampen the fall . You can also get hinges designed to allow softer opening .
One example is Hafele Avantos HK.
Used in kitchen cupboards but might be suitable .
(Easier to get a good finish on mdf )Blum Aventos HK-S Set -HK-S (Power Factor: 220-2215)
Blum Aventos HK-S SetCabinet Hinges & Stays / Cabinet Stays & Lifts / Aventos / HK-S (Power Factor: 220-2215)
Ikea use those hinges for their Metod range of kitchen lift up wall units - I use them for overbed cupboards
Last edited:
I was originally going to use normal cabinet hinges with one of these to lock closed, but now I'm thinking if it's possible to have a solution that self stays in place (the "Stays and Lifts" terminology in that Blum option) - would they be strong enough?
Last edited:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
