I have a brand new combi system installed in bungalow, Baxi 105e Instant installed in the loft and all new pipe work and radiators. I am experiencing two problems. The first is pressure loss. Setting the pressure when the system is cold to 1 bar it takes between 4 to 5 weeks for the pressure to drop and boiler stops working. I have the installer come back and have a look and he cannot find any leaks and I have had baxi look at the boiler and they stated that
"the appliance was working perfectly". I have also had a look myself and have put old wall paper (white side up) under all the pipes hoping to spot the leak by a water stain but cannot find anything. So anything else I can do ?
Second question, (may be related to the water loss) noise, the system is extremly noisy especially in the room under where the boiler is installed,
you get a thrumming/drumming sound from the pipes. How can I quite this noise down as it really does get on your nerves.
cheers
"the appliance was working perfectly". I have also had a look myself and have put old wall paper (white side up) under all the pipes hoping to spot the leak by a water stain but cannot find anything. So anything else I can do ?
Second question, (may be related to the water loss) noise, the system is extremly noisy especially in the room under where the boiler is installed,
you get a thrumming/drumming sound from the pipes. How can I quite this noise down as it really does get on your nerves.
cheers