Long handeled pz3 screwdrivers

[Fallout]

Any one know were they sell long handled (300mm plus). Pz3 screwdrivers? Screwfix only seem to sell them up to 150mm. Thanks

 

[AGAS]

Wera 347735 Kraftform L/s Screwdriver Set PZ PH SL (3 Pieces) if your using them a lot ,

 

[PrenticeBoyofDerry]

Are sure it is length of the handle you require or the blade?
Unsure what benefits a long handle will have? But if it is the blade?
https://www.amazon.co.uk/s/ref=nb_sb_noss?url=search-alias=diy&field-keywords=long+bladed+pz3

 

[Fallout]

well a long reach one as doesn't this give you move leverage?

 

[AGAS]

are you a plumber fallout ?

 

[Agile]

Leverage?

A screwdriver is not a lever.

It unscrews by applying rotational force called torque!

 

[Agile]

Leverage?

A screwdriver is not a lever.

It unscrews by applying rotational force called torque!

 

[big-all]

Leverage?

A screwdriver is not a lever.

It unscrews by applying rotational force called torque!

i think he was pointing out length does NOT give any advantage like a lever
ok i am now confused as those comments you where responding to where fallouts comments

 

[AGAS]

Leverage?

A screwdriver is not a lever.

It unscrews by applying rotational force called torque!

i think we know what he meant , hopefully ???

 

[DP]

Some screwdrivers have a hex section on the shaft or hole in the handle. Any force appled to these would be leverage

 

[vulcancontinental]

I always go for Kennedy screwdrivers from Cromwell tools but many do not like the fluted grips.

 

[Madrab]

If I need an extra long shafted screwdriver with extra torque, I'll use a 3/8" screwdriver handle or 3/8" drive ratchet, various extensions and a magnetic bit holder that'll take any standard sized bits.

 

[big-all]

i made a 250mm long extension from a length off hex that was the depth stop for a drill
bashed out the hex on a standard extension bar and hammered the end to be a tight fit on bar

 

[oilboffin]

Try a teng really good tools and do long drivers