Looking for a dust shroud to cover a drill bit

[gasbanni]

Just buy a large disposable dust sheet from tool station or screwfix ......large clear soft plastic they're cheap..........stick it 8' along the wall or even 10' with making tape. Roll it up and throw it when done .....

Paper drill shrouds .......no chance !!

 

[Trazor]

Is this still going on....Vacuum cleaner nozzle 1" under drill, sorted.

 

[Harry Bloomfield]

Is this still going on....Vacuum cleaner nozzle 1" under drill, sorted.

Any other solution will have the drill dust flying around in the air and landing everywhere. A vacuum cleaner nozzle close to the hole, will draw all of that dust in, before it can ever become airborne.

 

[conny]

Another for the vacuum method. My wife holds it about 1/4" away from the drill bit and catches every little bit.

 

[crystal ball]

Another for the vacuum method. My wife holds it about 1/4" away from the drill bit and catches every little bit.

I have one of those too, not available from Screwfix unfortunately

 

[conny]

I have one of those too, not available from Screwfix unfortunately

So no returns either.

 

[blup]

Vacuum, envelope on wall or this:

NILFISK VACUUM CLEANER DRILL DUST CATCHER TOOL FOR 30-38MM VAC END | eBay

Blup