Looking for a nice matwell

[Mark Elvin]

Looking for a nice matwell to go into our laminate flooring, 18mm thick.

Any suggestions welcomed.

 

[flooringman]

Quick-step do a very nice matwell to go with their flooring,

18mm. is very thick for a laminate floor ie. one with a photo layer on top. Are you sure it isn't an engineered floor? - if so these are normally formed by the fitter.

 

[Mark Elvin]

what thicknes will the quickstep one work with.

 

[flooringman]

You would have to check with them but their deepest floor is 9.5mm plus underlay.

 

[Mark Elvin]

You would have to check with them but their deepest floor is 9.5mm plus underlay.

Last question, I promise, is Quickstep any good?

 

[flooringman]

It is one of the best. I have been fitting it for over 12 years and never had a problem.

The profile on the boards make it the easiest laminate to fit (Laguna can be a little awkward) so I rate it very highly.

 

[Mark Elvin]

It is one of the best. I have been fitting it for over 12 years and never had a problem.

The profile on the boards make it the easiest laminate to fit (Laguna can be a little awkward) so I rate it very highly.

Thanks for the advice, we bought Quick Step Pespective V4 - http://www.laminate2go.co.uk/perspective/uf918.htm

Also ordered a mat well to go with it.