• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

looking to remove concrete pad in garden - but it contains a inspection chamber

Joined
20 Jan 2018
Messages
17
Reaction score
3
Location
Chepstow
Country
United Kingdom
Hi all,

I wonder if I could get your advice?

There is a old concrete pad in our garden. It used to have a gargage standing on it. But we took the garage down. We're now looking to remove the pad itself and turn it back to soil/grass. We have a breaker - and I have worked away at the thickest corner of the pad. It will take a while - but will break up. However, there is an inspection chamber located in the pad. So I'm not sure what to do (see photos).

Photo 1. Inspection chamber cover.
Photo 2. Inside inspection chamber. (The channels at the bottom of the chamber start at about 5 brick widths down.)
Photo 3. Concrete pad with IC (IC right of shot, behind compost bin!)

My questions:
1. Can we still take up the pad ourselves? (any UK rules or regs. we are breaking?)
2. Presumably it is not sensible to use the breaker too close to the inspection chamber... but how far should we stay away?
3. Anything else we haven't thought of?

Yes, if we remove the concrete it seems likely that the inspection chamber will end up stand proud of the surronding soil. Thats OK with us for now. Just want to get rid of the pad.

Thanks in advance.
 

Attachments

  • Photo 1. Inspection chamber cover.jpg
    Photo 1. Inspection chamber cover.jpg
    145.2 KB · Views: 507
  • Photo 2. Inside inspection chamber..jpg
    Photo 2. Inside inspection chamber..jpg
    232.5 KB · Views: 680
  • Photo 3. Concrete pad with IC.jpg
    Photo 3. Concrete pad with IC.jpg
    118 KB · Views: 456
1. Can we still take up the pad ourselves? (any UK rules or regs. we are breaking?)
No problem with you breaking the pad up yourselves.

2. Presumably it is not sensible to use the breaker too close to the inspection chamber... but how far should we stay away?
Cut through the slab maybe 450mm away from the chamber on all sides using a disc cutter - using a breaker will more than likely disturb the chamber sides.

3. Anything else we haven't thought of?
Get the skip ordered and prepare to be surprised by just how much broken concrete there will be!
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top