Hi everyone!
I have a m2n-sli deluxe ATX Mainboard from ASUS, which will will not post/display anything onto the screen. Heres what happens when you switch the computer ON:
- The CPU fan spins for 10 seconds, and switchs off. Sometimes it remains on
- The power LED switchs on for 5 seconds, turns off, but the HDD LED remains switched on
- There are no beeps from the internal speaker.
- The fan connectors (5 x 3 pin) don't seem to have enough power to power the fans as the case fan makes a squealing noise but does not spin.
This is what I've tried:
- I've taken both memory modules out of their slots - this gives 1 short and 1 long beep (indicates that the BIOS may be okay!)
- I've changed power supply units (same problem).
- The graphics card is brand new, i've touched it and its warm (not hot) when the computer is switched ON.
- I've unplugged the hard drive as well as the CD drives (Same problem).
- I've cleard the CMOS.
- I've tried it with the pci slots empty and the graphics card still slotted in!
My computers Specification:
- 250gb Hitachi SATA Hard Drive
- 2x Pioneer CD/DVD RW Optical Drives (1 x Sata - 1 x IDE)
- AMD Athlon X2 4200+
- Nvidia GeForce 210 (ASUS)
- Alpine 650watt Power Supply Unit
- 2 x 1GB corsair value select memory modules PC2-4200
It would be a relief if this was to work! Please assist me in the right direction anyone!
I have a m2n-sli deluxe ATX Mainboard from ASUS, which will will not post/display anything onto the screen. Heres what happens when you switch the computer ON:
- The CPU fan spins for 10 seconds, and switchs off. Sometimes it remains on
- The power LED switchs on for 5 seconds, turns off, but the HDD LED remains switched on
- There are no beeps from the internal speaker.
- The fan connectors (5 x 3 pin) don't seem to have enough power to power the fans as the case fan makes a squealing noise but does not spin.
This is what I've tried:
- I've taken both memory modules out of their slots - this gives 1 short and 1 long beep (indicates that the BIOS may be okay!)
- I've changed power supply units (same problem).
- The graphics card is brand new, i've touched it and its warm (not hot) when the computer is switched ON.
- I've unplugged the hard drive as well as the CD drives (Same problem).
- I've cleard the CMOS.
- I've tried it with the pci slots empty and the graphics card still slotted in!
My computers Specification:
- 250gb Hitachi SATA Hard Drive
- 2x Pioneer CD/DVD RW Optical Drives (1 x Sata - 1 x IDE)
- AMD Athlon X2 4200+
- Nvidia GeForce 210 (ASUS)
- Alpine 650watt Power Supply Unit
- 2 x 1GB corsair value select memory modules PC2-4200
It would be a relief if this was to work! Please assist me in the right direction anyone!