Painted an internal door at the weekend with Dulux water based gloss (mixed with a bit of Floetrol). My usual technique is to roller the door with a sponge sleeve and then lay off with a 3 inch fine finish brush and I have been pleased with the results in the past. However, this time was different!! For some reason I used a different brush to lay it off (still not sure why!!) and to say the end result was quite ridged is an understatement! I did try to sand and redo and whilst this has made it a little better, I'm still not happy with it.
I don't really what to sand again so would my only option be to use a chemical paint stripper and start again?
I don't really what to sand again so would my only option be to use a chemical paint stripper and start again?