- Joined
- 3 Dec 2004
- Messages
- 287
- Reaction score
- 1
- Country
It works fine almost all the time.
But sometimes, unpredictably, after working OK for several hours it pops itself off. It will light up again fine, but when turned up full the pilot is not really strong enough to keep the thermocouple glowing. Works OK if turned down a little.
Is there anything I can do to stop this happening?
But sometimes, unpredictably, after working OK for several hours it pops itself off. It will light up again fine, but when turned up full the pilot is not really strong enough to keep the thermocouple glowing. Works OK if turned down a little.
Is there anything I can do to stop this happening?