in my boiler i have changed the diverter valve and the diverter motor valve which i have tested,
changed the pcb board,
i have opened the bleed off of the pump and it spins quite easily with screwdriver
i have even manually depressed the pin on the diverter valve
for some reason the central heating is not getting hot and neither is the flow pipe. the hot water works. but even when on the central heating system fires up the secondry heat exchanger which purpose is to heat the water gets hot. how is this
thank you everybody
changed the pcb board,
i have opened the bleed off of the pump and it spins quite easily with screwdriver
i have even manually depressed the pin on the diverter valve
for some reason the central heating is not getting hot and neither is the flow pipe. the hot water works. but even when on the central heating system fires up the secondry heat exchanger which purpose is to heat the water gets hot. how is this
thank you everybody

