I turned off the internal mains stopcock earlier today so that I could fix a broken tap. Now when I turn it back on there is no supply. I briefly turned it back on and the off whilst I was doing the fix, in order to flush the loo and see whether the tap was ok. The supply came on and switched off fine at that point. Now it won't come on at all - taps are open, no supply.
The stopcock is a brass tap type and it opens and closes smoothly. It doesn't feel in any way broken, but there's nothing happening. I have tried turning it both ways to the full extent. I cannot see what could have happened to the stopcock.
The meter in the pavement is not ticking over (after a couple of hours). I have not touched the external stopcock.
Any help would be appreciated - I have no water!
Thanks in advance.
Martin.
The stopcock is a brass tap type and it opens and closes smoothly. It doesn't feel in any way broken, but there's nothing happening. I have tried turning it both ways to the full extent. I cannot see what could have happened to the stopcock.
The meter in the pavement is not ticking over (after a couple of hours). I have not touched the external stopcock.
Any help would be appreciated - I have no water!
Thanks in advance.
Martin.