Manhole blocked, too small to fit a rod

Joined
23 Jan 2011
Messages
1
Reaction score
0
Country
United Kingdom
My manhole outside the kitchen, under the window is blocked. I got drain rods to try. But the manhole is too small, the rods are too big for it. I can't put it into the drain pipe. the angle is very sharp. What should I do? Thanks.
 
Get the shovel out and start digging.

It is pointless having rodding access if you can not get the rods in.
 
Your rod ( and staff) wouldn`t be much comfort then , Noseall - I thought with your name you might`ve been an ancestor of David who wrote those words ( Psalm 23) :mrgreen: Anyways the OP might have a 12" plastic manhole which, though satisfying building regs etc . aint much use in the real world :cry: You might be lucky and get the blockage away by agitating around at the bottom of the manhole with a floormop - make sure the head is on secure ! otherwise you are @ the mercy of the Powered Drain Jetter and their high £££ . :cry:
 
FOCUS sell a 25 ft drain cleaner for £25; it's like a larger version of expanded curtain wire with a turning handle, with a claw at the end. It will fit down a basin waste (if you're lucky). It's intended for waste pipes up to say inch & a half, so may not work in a 4" sewer.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top