The check input warning light flashes. |Water is getting into the machine but at a much slower rate. I have checked the mains water supply and it is fine.I looked at the online manual and it said to clean the inline filter which is a small nylon mesh affair. this I did and the waterflow increased slightly.
According to the manual there should be another plastic filter to pull out but there isn't. there is, what looks like a black plastic sealing disc which I suppose is a water inlet control valve. Before I start taking the machine to bits does anyone have any suggestions or do you know where i can get a maintenance manual from?
According to the manual there should be another plastic filter to pull out but there isn't. there is, what looks like a black plastic sealing disc which I suppose is a water inlet control valve. Before I start taking the machine to bits does anyone have any suggestions or do you know where i can get a maintenance manual from?