In the process of moving the downstairs toilet which is at present about 3 mts from the outer plastic soil stack. The 110 mm pipe runs along the side of the wall and I would like to continue this pipe another 1 metre along the same wall then turn 90 degrees right and run for another 1 metre. This would give a total 110mm pipe run of about 5 mts with one right angle in the pipe and one right angle from the pan into the pipe. (If that makes sense)
1------ Is this a possible move ? and what is the minimum length to drop ratio I can get away with when a right angle comes into the equation.
2------- The sink waste also goes into the same 110 mm soil pipe, is there any particular type of trap I should get for the sink?
1------ Is this a possible move ? and what is the minimum length to drop ratio I can get away with when a right angle comes into the equation.
2------- The sink waste also goes into the same 110 mm soil pipe, is there any particular type of trap I should get for the sink?