Any ideas on this. Gap between two building is 93mm. Gutter is needed to be fixed as the flow of the roof is towards the neighbouring building. Any products or ideas? Thanks
Just to add a little more info, the neighbouring roof is asbestos corrugated, which is about 8 inches above the line of the flat roof then decreasing to about 8 inches below at the other end. The neighbouring wall is not rendered. The neighbours wall can't be touched i.e fixings.
you could get a one piece gutter made up easily to any dimension. main limiting factor is transportation. 8 mtrs no problem
I am not talking formed onsite thin stuff.
precise sheetmetal engineering of christchurch dorset, you want to speak to Robert... fabricated many for us to use as box gutters etc from alli or stainless steel if need be. you can google them.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local