Narrow guttering

[upstairscharly]

Any ideas on this. Gap between two building is 93mm. Gutter is needed to be fixed as the flow of the roof is towards the neighbouring building. Any products or ideas? Thanks

 

[noseall]

Build a valley gutter and either lead it or use a weathering roof membrane i.e. felt, rubber, fibreglass etc.

 

[upstairscharly]

Just to add a little more info, the neighbouring roof is asbestos corrugated, which is about 8 inches above the line of the flat roof then decreasing to about 8 inches below at the other end. The neighbouring wall is not rendered. The neighbours wall can't be touched i.e fixings.

 

[datarebal]

you could get a one piece gutter made up easily to any dimension. main limiting factor is transportation. 8 mtrs no problem
I am not talking formed onsite thin stuff.

 

[upstairscharly]

Any good suppliers for this one piece guttering? Sounds a good idea.

 

[datarebal]

precise sheetmetal engineering of christchurch dorset, you want to speak to Robert... fabricated many for us to use as box gutters etc from alli or stainless steel if need be. you can google them.

 

[upstairscharly]

Thank-you for your help datarebal