Hope someone can help. I have got some spots of the evil black sludge that lives in radiator bottoms on a customers block paving-small spots,but I've got to get them out-is chemical best,or pressure wash,or if i have to turn the blocks over,how difficult is that?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
nasty stains block paving
- Thread starter mikethepipe
- Start date
If they are clays, then they can be flipped, if they are conc's then no.
Depending on the sort of pavers used, if they were just laid on grit with sand between gaps you can lever odd ones out and replace with new, which is by far the cheaper option. Otherwise start with just flooding with water and scrubbing, progressing up to washing up liquid then bleach etc.
bleach will not help with a black iron oxide stain.
An acid cleaner like jenolite might, but it will also eat the surface of the concrete.
Have you tried rubbing the stains with a bit of broken brick or set mortar? it wears away the dirty part if it has not soaked in far.
An acid cleaner like jenolite might, but it will also eat the surface of the concrete.
Have you tried rubbing the stains with a bit of broken brick or set mortar? it wears away the dirty part if it has not soaked in far.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
