It depends what valve(s) you have. There are a number of different wiring plans: C, S, W, Y, U and possibly more.
Nest Gen 3 Install advice
- Thread starter Caoimh1n
- Start date
-
- Tags
- installation nest
Sponsored Links
Your boiler must have a pumped system.
So if its correctly fitted then you will have one or two motorised valves. These are either two port or three port.
Thats the number of pipes going into them.
Until we know that we cannot even start to help.
But to add to the complications not all systems are always wired correctly!
It can be a heating engineer's nightmare.
I had one with intermittent shorts every day or two to earth and from somewhere where the wiring was totally buried and hidden in the plaster!
After about three visits I had to give up because the wife was like a dragon and I found that too stressful. What did she do? She was a doctor specialising in dealing with pregnancies which would be the last place I would have expected anyone to work if they were not patient and not stress inducing.
Having lived for 13 years with a Chinese lady I was well accustomed to dealing with them!
Tony
So if its correctly fitted then you will have one or two motorised valves. These are either two port or three port.
Thats the number of pipes going into them.
Until we know that we cannot even start to help.
But to add to the complications not all systems are always wired correctly!
It can be a heating engineer's nightmare.
I had one with intermittent shorts every day or two to earth and from somewhere where the wiring was totally buried and hidden in the plaster!
After about three visits I had to give up because the wife was like a dragon and I found that too stressful. What did she do? She was a doctor specialising in dealing with pregnancies which would be the last place I would have expected anyone to work if they were not patient and not stress inducing.
Having lived for 13 years with a Chinese lady I was well accustomed to dealing with them!
Tony
- Joined
- 22 Jan 2007
- Messages
- 14,432
- Reaction score
- 2,097
- Country
Do you think the wiring should all be surface mounted and exposed?
Sponsored Links
Wire it neatly in surface Pyro and it would look awesome! Surface trunking is for amateurs!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
