New flooring lifting at edge

[Teknophobia]

Hi all.

This is the flooring in question: http://tinyurl.com/5fylt9

Expansion is 12mm on 3 edges (as per instructions). The flooring is 'sitting up' on the edge that has no wall (i.e. where the carpet will go next weekend). so expansion certainly not the culpirt. Floor was laid on Sunday.

Will this 'sit down' eventually? Or is there some form of bracket I can use to screw the end into the subfloor (concrete)?

Thanks as always,

TEk

 

[WoodYouLike]

A picture would be helpful here. What do you mean with 'sit-up'?

 

[Teknophobia]

Sorry at work, pic will have to wait.

I meant 'sit-up' as in raised off the floor (by about 1 inch).

 

[GHFlooring]

what the problem sounds like to me is that under floor is not level it runs of at that point did you check the floor prior to laying the floor or the boards are cupped the problem you get with cheaper end products

 

[WoodYouLike]

Plus the floor could lift up especially at that point where it's still waiting get get pushed down by any edging.