Evening folks, some advice needed.
I had a new Heatline boiler hung a couple of months ago and all pipework ran in underfloor but we couldn't hang the rads and fire it up because walls weren't formed etc (doing a full renovation on a flat)
Anyways finally got all the radiators hung and connected up today and filled the system, switched on the gas and fired the boiler. The central heating is working a treat with no issues at all but there is no DWH at all at any of the taps and no reaction from the boiler at all when water is requested.
Assuming the hot water pipes are connected properly is there anything obvious I should look for at the boiler. Had a look at the manual and it mentions a filter on the inlet side of the block.
Its a Heatline S24 boiler.
Cheers
I had a new Heatline boiler hung a couple of months ago and all pipework ran in underfloor but we couldn't hang the rads and fire it up because walls weren't formed etc (doing a full renovation on a flat)
Anyways finally got all the radiators hung and connected up today and filled the system, switched on the gas and fired the boiler. The central heating is working a treat with no issues at all but there is no DWH at all at any of the taps and no reaction from the boiler at all when water is requested.
Assuming the hot water pipes are connected properly is there anything obvious I should look for at the boiler. Had a look at the manual and it mentions a filter on the inlet side of the block.
Its a Heatline S24 boiler.
Cheers