- Joined
- 13 Apr 2021
- Messages
- 9
- Reaction score
- 2
- Country
Its a standard 1000mm double
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
No flow to 1 radiator
- Thread starter Andrew Cook
- Start date
- Joined
- 13 Apr 2021
- Messages
- 9
- Reaction score
- 2
- Country
Sooooo, 10 ltrs took approx 30-40 sec on feed and return so that sounds pretty good. While about it i replaced isolator with full bore valves anyway. Let 20 ltrs flow through drain valve for feed and then flow with TRV locked on the other rads. So should be no air trapped ive got good flow on return and feed independently
- Joined
- 13 Apr 2021
- Messages
- 9
- Reaction score
- 2
- Country
Results are in. Heating engineer has checked the boiler, somehow the flow vale had been knocked and was almost off. Reset to correct position so now working fine.
Thanks for help, there was some really sound advice which really helped.
Thanks for help, there was some really sound advice which really helped.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
