you can get them from parts center,they are part of plumb center
p.s. what oil pressure do you have and whats the co/co2 reading
regards jay
already got the nozzles thanks.
no idea on the oil pressure or co/co2 readings i would like to know
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Oil Boiler Servicing
- Thread starter andyinscotland
- Start date
already got the nozzles thanks.
no idea on the oil pressure or co/co2 readings i would like to know
you can get them from parts center,they are part of plumb center
p.s. what oil pressure do you have and whats the co/co2 reading
regards jay
already got the nozzles thanks.
no idea on the oil pressure or co/co2 readings, i would like to know
W
wilhelm
book says for 1 gallon 120 psi . 12% co2 . Fgt 195/210
Grant vortex condensing. are good.
Grant vortex condensing. are good.
If you go to the oftec web site type in your post code and they will supply details of engineers near you who are oftec reg
they will give it a thorough check and set co2/co pump pressure
if you watch you may pick up some hints
they will give it a thorough check and set co2/co pump pressure
if you watch you may pick up some hints
If you go to the oftec web site type in your post code and they will supply details of engineers near you who are oftec reg
they will give it a thorough check and set co2/co pump pressure
if you watch you may pick up some hints
good idea thanks
thanks for the info
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local