E
elrobbo82
drgaz
if i was burning off i would just do the whole door as it would not take much time to do. you would then sand down and as i prefer start again on the bare timber with a microporus paint system to let the wood breath (applying knotting to all knots). don't forget to fill all splits and cracks with a decent wood filler. i would recommend cuprinol 2 part filler for this.
that is my advice any way. hope this is useful.
if i was burning off i would just do the whole door as it would not take much time to do. you would then sand down and as i prefer start again on the bare timber with a microporus paint system to let the wood breath (applying knotting to all knots). don't forget to fill all splits and cracks with a decent wood filler. i would recommend cuprinol 2 part filler for this.
that is my advice any way. hope this is useful.