- Joined
- 3 Apr 2023
- Messages
- 1
- Reaction score
- 0
- Country
Hello,
Thank you in advance for all who will take time to support!
I am planning to install patio grid in my garden to give some firmness to my heavy clay soil.
Now I understood I need to dig around 150mm and put around 70mm hard subbase 40mm of Sharp sand and the 40mm of the grid filled with probably 10mm chipping (without forgetting the fabrics below the hard subbase.
However as I am on clay soil and need permeability (yes raining a lot in Wales and I have a conservatory adjacent to where I am going to do the patio), I am not sure what to use as hard subbase.
I read MOT 1 is the most common but my understanding is that it will not be good for the permeability so can I use 20mm Limestone instead?or 20mm gravel?
It is for an area of 10sqm approximately.
Thank you!
Thank you in advance for all who will take time to support!
I am planning to install patio grid in my garden to give some firmness to my heavy clay soil.
Now I understood I need to dig around 150mm and put around 70mm hard subbase 40mm of Sharp sand and the 40mm of the grid filled with probably 10mm chipping (without forgetting the fabrics below the hard subbase.
However as I am on clay soil and need permeability (yes raining a lot in Wales and I have a conservatory adjacent to where I am going to do the patio), I am not sure what to use as hard subbase.
I read MOT 1 is the most common but my understanding is that it will not be good for the permeability so can I use 20mm Limestone instead?or 20mm gravel?
It is for an area of 10sqm approximately.
Thank you!
Last edited:
