It may be the photo....
BUT
Isn't the neutral (blue) meter tail going into the live terminal on the main switch
BUT
Isn't the neutral (blue) meter tail going into the live terminal on the main switch
Picture of the week - I know I have nicked RF's idea.
- Thread starter martinxxxxxx
- Start date
P
Paul_C
Isn't the neutral (blue) meter tail going into the live terminal on the main switch
I think it's just the angle of the photo: Brown is to the right of blue, which matches up with the correct connections to the switch.
Ah yes. Quite right.
It is a radial with a B40 on it. The radial is connected via a 6mm cable that persumably goes to a JB somewhere and from then on is 2.5mms. What you can see are 2 pieces of 2.5 used to extend the 6mm inside the CU.
Good Spot
There are none if it enclosed and accessible - an oxymoron perhaps?
But he has extended a 6mm cable with two bits of 2.5, by my calculation 2.5+2.5 does not equal 6.
This circuit is also fed from an incorrect sized breaker as it is a B32, and although it looks like a ring at first glance it is in fact a 2.5mm radial circuit.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
