Submain for the cellar. Fed from a 60amp sw-fuse. Not really apparent in the pic, but the submain is two 6mm T+E's in parallel. Notice the 'busbar'.
Just a bleedin mess!
Odd way to connect to a 25amp fryer. The next pic showing the feed to this.
What can you say really?
Just a pic of some typical "it's metal, lets earth it" type thinking.
Again, just a mess, but there are also several 32amp circuits doubled up on breakers. A huge loading on a small board with just a 60amp submain. The submain fuses quite often apparently. And why the 30mA RCD incomer![Evil Twisted :evil: :evil:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Dish washer (lovely and clean). 5300watts.....and connected via the following pic....
5300watt dishwasher...
![1334074741.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074741.jpg)
Just a bleedin mess!
![1334074751.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074751.jpg)
Odd way to connect to a 25amp fryer. The next pic showing the feed to this.
![1334074747.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074747.jpg)
What can you say really?
![1334074748.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074748.jpg)
Just a pic of some typical "it's metal, lets earth it" type thinking.
![1334074753.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074753.jpg)
Again, just a mess, but there are also several 32amp circuits doubled up on breakers. A huge loading on a small board with just a 60amp submain. The submain fuses quite often apparently. And why the 30mA RCD incomer
![1334074755.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074755.jpg)
Dish washer (lovely and clean). 5300watts.....and connected via the following pic....
![1334074759.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074759.jpg)
5300watt dishwasher...
![1334074936.jpg](http://www.askthetrades.co.uk/gallery/Lectrician/1334074936.jpg)