PIR with LED

[jacko57]

Have purchased a stand alone PIR, MI state no lower than 25 watts
the LED exterior fittings are rated at 6 watt each wanting to fit a pair.

Is it plain that the PIR will not operate correctly?

Is there a PIR that will switch such a low wattage?

Cheers

 

[viewer]

Will probably flash on and off. Just try it. It won't cause any harm. I suppose you could put a reistance into the circuit, but, sorry, can't tell you what.

 

[EFLImpudence]

Is it plain that the PIR will not operate correctly?

Or at all.

Is there a PIR that will switch such a low wattage?

There are.
It would seem that models where no minimum is stated would be suitable.

Go to the link and click on 'Questions and Answers'
http://www.lightingstyles.co.uk/Ext...tion-sensor-lights/Remote_PIR_black_white.htm

 

[Taylortwocities]

Better quality PIRs have relay-switched outputs and do not care about minimum loads.

Best you take that back to the shop and get one that does not have a minimum load.