Plug tops / Plug caps?

I have this very old NOS MK plug and socket. Even back then they are calling it a socket and plug.
20260214_212718.jpg
20260214_212704.jpg
 
I don't think so. If I understand correctly, things that we would call CH boilers appear to be called 'furnaces' over there.
I don't know what americans would call what we call a "boiler".

But afaict "wet" central heating systems like we use in the UK are unusual in the USA. Americans tend towards "central air" systems, where heated or cooled air is pumped around the house. The "furnace" is the component of the "central air" system that heats the air.
 
The French have plug sockets, the part connected to the appliance has a socket for the earth pin, but the lives plug into the wall plug socket. So since both parts can be given the name of either plug or socket, it seems to make sense to have some unambiguous name.
Plocket, Plet, Soug, socklug. Perhaps a matching pair should be Soug and Guos? they both sound a little French.
We however, have a whole host of names which don't seem to make sense. Boiler for an item which, if it boils water, is considered faulty, the USA furnace does seem a better name.
Is a furnace the best possible furn?
 
I must admit that I was brung up with the saying "Bulbs go in gardens and lamps go in lampholders"
Werrll I were brunged up nowin':

A lamp was a fitting for the purpose of generating/emitting light

In a lamp there is:

1, A gas mantle,
1771111992633.png
or

2, A wick dipped in an oil supply,
1771111863593.png
or

3, A candle,
1771111915500.png
or

4, A bulbholder containing a bulb.
1771111487018.png


It seems that some dictionaries agree too:

1771113158231.png



1771113247060.png



1771111606696.png


Shops used to sell bulb holders
1771112344575.png

ok some of those are (in my mind incorrectly) described as lamp holders.


Shops used to sell bulbs


1771112083252.png

I dare say some of those are also (in my mind incorrectly) described as lamps.

And of course I've already shown shops used to sell lamps, see 1-4 above.


also plugs plug into a socket
That is how I understand it too


And that is what will always be my troth
 
.... But afaict "wet" central heating systems like we use in the UK are unusual in the USA. Americans tend towards "central air" systems, where heated or cooled air is pumped around the house. The "furnace" is the component of the "central air" system that heats the air.
Yes, I totally agree with all that, but ....
I don't know what americans would call what we call a "boiler".
The US terminology seems a bit confused/confusing, such that I didn't know the answer to that, so I consulted Mr Wikipedia and if what he says is true, then it seems that they may well call that a "furnace" as well ... (with my emboldening) ....

Buildings​

  • Furnace (central heating): a furnace, or a heater or boiler, used to generate heat for buildings
  • Boiler, used to heat water; also called a furnace in American English when used for heating and hot water in a building
 
Yes, I totally agree with all that, but ....

The US terminology seems a bit confused/confusing, such that I didn't know the answer to that, so I consulted Mr Wikipedia and if what he says is true, then it seems that they may well call that a "furnace" as well ... (with my emboldening) ....



Buildings​

  • Furnace (central heating): a furnace, or a heater or boiler, used to generate heat for buildings
  • Boiler, used to heat water; also called a furnace in American English when used for heating and hot water in a building


That is my experience, however if my understanding is correct their wet system are - or possibly were - more commonly steam powered and their radiators were in the early days mounted high up.
 
That is my experience, however if my understanding is correct their wet system are - or possibly were - more commonly steam powered and their radiators were in the early days mounted high up.
I don't know, so you may well be right.

However, it certainly is my understanding that any for of 'wet' central heating is/was fairly uncommon over there. I can see that might make some sense. Since the ultimate aim is to heat the air within a building, it would seem reasonable, possibly 'better', to heat air directly, rather than a heated water/steam. However, the 'dry' systems presumably are'more demanding' in terms of infrastructure requirements, and hence are probably only really sensible in relation to 'new builds'?
 
My first house was hot air, ducts took air around the house, and vents in the doors allowed it to return. Yes it heated the house very fast, but it also cooled fast, and cost a fortune to run.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top