PLUMBING
- Thread starter bauerjan
- Start date
Where's my reply gone 
They got the same reply from us only worded diff.... 
Many thanks Dave - gas4you, to my query.
Unfortunately the monobloc has already been fitted by the kitchen installer - I have to carry out the plumbing.
Each tap connector is a app. 9 inch length of 15mm copper. The pipe has been shrunk at one end and the tap connector is welded on at this end.
Would it be adequate to wrap some tape around the 15mm end of the pipe and use a vice grip to tighten the connection?
Many thanks
Unfortunately the monobloc has already been fitted by the kitchen installer - I have to carry out the plumbing.
Each tap connector is a app. 9 inch length of 15mm copper. The pipe has been shrunk at one end and the tap connector is welded on at this end.
Would it be adequate to wrap some tape around the 15mm end of the pipe and use a vice grip to tighten the connection?
Many thanks
You shouldn't need to use grips or wrenches, hand tightness should do it as was mentioned before they have 'o' rings to make the seal-if you go too mad on them you will destroy them. 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local