- Joined
- 17 Nov 2006
- Messages
- 18
- Reaction score
- 0
- Country
Hi all,
looking for a wee bit of advice - I've got a larder type kitchen cupboard at the end of a worktop run, top half houses the oven, and the bottom half just has shelves. I want to stick a dishwasher in the bottom half, but from my reading so far I understand that 'normal' integrated dishwashers wouldn't fit inside the 600mm carcass. Obviously as the top half of the unit is supporting the oven, I can't really start cutting bits off the lower section, which leaves me with 2 choices - buy a slimline dishwasher (& lose quite a lot of 'dead space') OR find a 570mm (ish) wide dishwasher and slide it into the lower section. Does anyone have any experience of this kind of thing - can you get integrated dishwashers that will slot into an already installed carcass?
Cheers
Rob
looking for a wee bit of advice - I've got a larder type kitchen cupboard at the end of a worktop run, top half houses the oven, and the bottom half just has shelves. I want to stick a dishwasher in the bottom half, but from my reading so far I understand that 'normal' integrated dishwashers wouldn't fit inside the 600mm carcass. Obviously as the top half of the unit is supporting the oven, I can't really start cutting bits off the lower section, which leaves me with 2 choices - buy a slimline dishwasher (& lose quite a lot of 'dead space') OR find a 570mm (ish) wide dishwasher and slide it into the lower section. Does anyone have any experience of this kind of thing - can you get integrated dishwashers that will slot into an already installed carcass?
Cheers
Rob
