Potterton Prima F not sparking. Any help?

[swinstaller]

Hi guys, i'm looking for a bit of help with a Potterton Prima F.

I'm gas safe registered installer but by my own admission only have a surface knowledge when it comes to the internal workings of a boiler.

Anyway, a friend of mine asked me to have a look at his Potterton as he isn't getting any heating or hot water. When I got there I removed the cover from the bottom of the boiler and the lead that is connected to the ignition electrode was disconnected, but at the opposite end.

Does anybody know where abouts on the boiler this lead connects to?

Any help would much appreciated

 

[kevindgas]

post in the combustion chamber and we will be pleased to help
Gas critical questions are not answered on the open forum for obvious reasons.

 

[swinstaller]

thanks mate,will do

 

[ChrisR]

The instructions are available to all, though, at partsarena.com/baxi . or is it \baxi
The HT lead plugs in to a slot at the left rear of the board, as you look at it.

 

[kevplumb]

have you looked at the prima MI's on partsarena chris

be lucky if you can fig out where the board goes