Hi,
I’ve recentlr added the Smart Com to our PE 48-W panel. Do do so, I had to update from V3.2 to 4.0. Installation was fine until around 2 hours after when the panel went into fault displaying ‘Supervision Fault’ on all of our ricochet devices. Now when I walk test the devices, they do not work. I’ve tried leading it in engineer with the commissioning link on for 15 mins to re establish the ricochet network but am still having no luck at all.
Any help would be appreciated
Thank you
I’ve recentlr added the Smart Com to our PE 48-W panel. Do do so, I had to update from V3.2 to 4.0. Installation was fine until around 2 hours after when the panel went into fault displaying ‘Supervision Fault’ on all of our ricochet devices. Now when I walk test the devices, they do not work. I’ve tried leading it in engineer with the commissioning link on for 15 mins to re establish the ricochet network but am still having no luck at all.
Any help would be appreciated
Thank you