program 2000 integrated door

[kennycapes]

Hi all,

I have recently bought a second hand Program 2000 fully integrated dishwasher. I got the old door off but looking at the parts i can see how to put the door for our kitchen on. i have added two link below which are the parts used to fit it but if anyone knows or perhaps can point me to the manual i would really appreciate it.

http://www.espares.co.uk/part/dishw...83/1720/0/715048/1106313/dishwasher-clip.html

http://www.espares.co.uk/part/dishw.../715048/185191/dishwasher-door-hinge-gui.html

 

[tonto33]

what do u need to do?
using ur links .. link 1 fits on appliance link 2 fits on kitchen decor door

 

[kennycapes]

I don't see then what to do. I can see how it fixes in. When I offer up the door there seems to be no way fix it into place

 

[Leccy758]

Those parts are typical whirlpool parts.

The plastic part screws to the wooden door and the lugs go into square holes in the appliance door, you should have 4 screws that need to be loosened off on the door (on the inside of the appliance door opposite side to the square holes)

When you fit the wooden door you put it towards the bottom of the square holes then lift it up. Then you tighten the screws on the inside part of the door which tightens the metal brackets (which are part of the machine and fitted inside the door) onto the plastic lugs.

Note these mounting brackets are for particular machines and are not universal but most Whirlpool, Prima and some Diplomat machines (basically re-badged whirlpools) use this type.

 

[kennycapes]

Perfect. Just gone through that and now the door is on

Many thanks