Hi First time hope someone can help
Decided after all these years to add a yale 6080 remote keypad to system to save running through house if using back door
Instructions poor just state look in system manual (6080 not around when 3500 written)
Anyway managed to get yale help line last week. who emailed learn procedure
So great keypad in system
can arm home and away
but cannot set unit to disarm
left in default pin code so disarm plus 0000 how do i get it to use code in 3500 or set the code in the keypad
p.s. yale gave me the following to learn into 3500
CP to add devices
then on 6080 keypad
disarm twice, Panic A and 0000 (green light will flash)
panic A and 1 (siren will acknowledge)
disarm twice
return cp to Alarm off
This works great
have trawled internet checked PIN install methods none work can arm but disarm led flashes and nothing happens
any body help
Will try Yale monday if i can get through
at least can set home and away
Decided after all these years to add a yale 6080 remote keypad to system to save running through house if using back door
Instructions poor just state look in system manual (6080 not around when 3500 written)
Anyway managed to get yale help line last week. who emailed learn procedure
So great keypad in system
can arm home and away
but cannot set unit to disarm
left in default pin code so disarm plus 0000 how do i get it to use code in 3500 or set the code in the keypad
p.s. yale gave me the following to learn into 3500
CP to add devices
then on 6080 keypad
disarm twice, Panic A and 0000 (green light will flash)
panic A and 1 (siren will acknowledge)
disarm twice
return cp to Alarm off
This works great
have trawled internet checked PIN install methods none work can arm but disarm led flashes and nothing happens
any body help
Will try Yale monday if i can get through
at least can set home and away