I am having problems wiring up four spotlights in my bathroom via a transformer to a terminal block then onto two junction boxes and a pull switch. I have tried two transformers and two terminal blocks as I could not get a live current running from one of the junction boxes to the pull switch. I have now forgotten how I wired up the terminal block in the first place and now have no lights on the first floor of my house!
The transformer input end has a neutral and a live to feed into the terminal block. How do I connect these up the live, earth and neutral wires of the pull switch within the terninal block? Also I have two lives, two earths and two neutrals on the other side of the terminal block from the two juntion boxes and I can't remember how these were connected together on the other side. Am kicking myself that I didn't sketch out how they were to start with when I at least had live current running through the transformer. Any help would be very much appreciated, thanks.
The transformer input end has a neutral and a live to feed into the terminal block. How do I connect these up the live, earth and neutral wires of the pull switch within the terninal block? Also I have two lives, two earths and two neutrals on the other side of the terminal block from the two juntion boxes and I can't remember how these were connected together on the other side. Am kicking myself that I didn't sketch out how they were to start with when I at least had live current running through the transformer. Any help would be very much appreciated, thanks.