I plan to install an irrigation system to water a number of fence mounted plant baskets and some large plant pots. I want the option of using either the outside tap or a water butt to provide the water. I am considering using a drill powered pump for the water butt. Will this work ok and is there a minimum capacity (l/h) I should be looking at? Thanks.
Pump for irrigation system
- Thread starter davecooper
- Start date
Sponsored Links
- Joined
- 24 May 2016
- Messages
- 3,817
- Reaction score
- 730
- Country
Doubt a drill powered pump would work well if at all. What is height of the baskets from ground level and the distance from water butt to the furthest basket.
The baskets are about 2m above the ground and the last basket is around 20m from the water butt
Sponsored Links
- Joined
- 24 May 2016
- Messages
- 3,817
- Reaction score
- 730
- Country
Though small bore pipe I assumme so I`m thinking a sub pump in the water butt.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
