Pyronix Enforcer alarm sounding when not armed

[bs3john]

Hi sparkymarka. I managed to fish out that post you mentioned. Turns out that the output type for the bell had been changed to 19 from 14. I must have changed this without realising at some point when I was trying to delete or add the bell when I moved house.

I also added some masking tape to the screw heads in the door contact for good measure.

Problem solved!

Thank you all for your help and suggestions.

 

[mick the bell]

if the log reports wireless tamper restore ,thats what the problem is .make sure both tamper contacts on the device are making good contact,people often forget there is a switch on the back of the contact pcb as well as the front..

 

[sparkymarka]

Try reading the posts before posting !