1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Pyronix Enforcer alarm sounding when not armed

Discussion in 'Alarms, CCTV & Telephones' started by bs3john, 26 Jan 2019.

  1. bs3john

    bs3john

    Joined:
    26 Jan 2019
    Messages:
    8
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi sparkymarka. I managed to fish out that post you mentioned. Turns out that the output type for the bell had been changed to 19 from 14. I must have changed this without realising at some point when I was trying to delete or add the bell when I moved house.

    I also added some masking tape to the screw heads in the door contact for good measure.

    Problem solved!

    Thank you all for your help and suggestions.
     
  2. mick the bell

    mick the bell

    Joined:
    11 Feb 2019
    Messages:
    2
    Thanks Received:
    0
    Country:
    United Kingdom
    if the log reports wireless tamper restore ,thats what the problem is .make sure both tamper contacts on the device are making good contact,people often forget there is a switch on the back of the contact pcb as well as the front..
     
  3. sparkymarka

    sparkymarka

    Joined:
    16 Feb 2011
    Messages:
    6,254
    Thanks Received:
    980
    Location:
    Sheffield
    Country:
    United Kingdom
    Try reading the posts before posting !
     
Loading...

Share This Page