hi.. we have just moved into a house with a lovely rayburn 355m solid fuel stove which heats the rads and water. we are due to have a condeser boiler put in soon for convieniance and would like to use the rayburn just as a cooker. have read about putting sand in the boiler once it is disconnected??? also to definatley not cap off the old pipe outlets...apparently agas are not allowed to run if they have a back boiler and have been disconnected from heating and water. is it the same for rayburns??
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
rayburn 355m disconnecting from water and heating!!
- Thread starter amymorpeth
- Start date
hi.. we have just moved into a house with a lovely rayburn 355m solid fuel stove which heats the rads and water. we are due to have a condeser boiler put in soon for convieniance and would like to use the rayburn just as a cooker. have read about putting sand in the boiler once it is disconnected??? also to definatley not cap off the old pipe outlets...apparently agas are not allowed to run if they have a back boiler and have been disconnected from heating and water. is it the same for rayburns??IIRC the 'official' conversion is to replace the boiler with a firebrick panel or 'dummy boiler' made for the job.
A 'dry' boiler, or one filled with sand would probably run a lot hotter than the manufacturers intended, so thermal expansion of the metal may become a problem.
A 'dry' boiler, or one filled with sand would probably run a lot hotter than the manufacturers intended, so thermal expansion of the metal may become a problem.
D
DeltaT
The only safe way of doing it is to remove the boiler & build up with fire bricks.
Specialist job really as the top needs to come off to get the boiler out. You could always contact an AGA/Rayburn agent/installer.
Can be done & it's well worth doing.
Specialist job really as the top needs to come off to get the boiler out. You could always contact an AGA/Rayburn agent/installer.
Can be done & it's well worth doing.
Walter Dix and co are the AGA agents around here.....0191 4820033.
John
John
M
mysteryman
If the Rayburn is a twin burner model [one for the boiler, one for cooking] you can probably use the cooker burner only and disable the boiler burner.
Check with AGA Rayburn Technical.
Check with AGA Rayburn Technical.
What type of "condensor boiler" are you having fitted?
Are you keeping the hot water cylinder and re connecting new boiler to this and disconnecting the solid fuel?
Might I suggest another arrangement!
How about re arranging the fire bricks for summer use thus lowering the output and upgrade to a new twin coil cylinder with the coils nested.
The second coil then connects to the new boiler.
Have you had a plumber involved yet and what has he suggested?
its an alpha cd28x we are having fitted with premier pack and we get 6yrs parts and labour warrenty. my plumber is just disconnecting the rayburn 355m as he is not a specialist. the hot water tank in airing cupboard will be removed and the header tanks in loft to. we have 3 kids, one of whom is disabled so cleaning out ashpans and grates 2- x a day, loading up coal scuttles and making sure its running as efficently as poss is a hard job lol. i love it to bits but its does cost more than gas will. i would love to keep it hooked up to everything along with the boiler so its always there as back up. but i dont know how much this would cost and if we can afford it. at the moment the kids come first and having a boiler in is best for the family. but the rayburn will never go!!
A dummy boiler.....where can you get those from.
A dummy boiler.....where can you get those from.
Walter Dix and co are the AGA agents around here.....0191 4820033.
John
thanks
D
DeltaT
we have 3 kids, one of whom is disabled...................And every one of them a blessing.
A specialist would remove the top & the existing boiler. Fill the void the boiler has left with fire brick.
Very good call regarding a thermal store or heat bank to replace your existing cylinder, that would mean retaining your existing Rayburn as it is.
But pointless doing this if you don't intend to make full use of the Rayburn.
I hope that's of some help.
A specialist would remove the top & the existing boiler. Fill the void the boiler has left with fire brick.
Very good call regarding a thermal store or heat bank to replace your existing cylinder, that would mean retaining your existing Rayburn as it is.
But pointless doing this if you don't intend to make full use of the Rayburn.
I hope that's of some help.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
