- Joined
- 20 Jul 2008
- Messages
- 3
- Reaction score
- 0
- Country
Hi.
I want to remove the side panels on the dishwasher to access the inlet valve as the machine is not filling, although the pump works..
I cannot find out how to remove the top which needs to be done before the side panels will come off. There seem to be no screws holding it only plastic.
lugs.javascript:emoticon('')
On another part of this forum I had read that tipping the washer back by 45 degrees freed the float valve which can cause this problem, but not in my case so I think it must be the inlet valve at fault.
Thanks
I want to remove the side panels on the dishwasher to access the inlet valve as the machine is not filling, although the pump works..
I cannot find out how to remove the top which needs to be done before the side panels will come off. There seem to be no screws holding it only plastic.
lugs.javascript:emoticon('')
On another part of this forum I had read that tipping the washer back by 45 degrees freed the float valve which can cause this problem, but not in my case so I think it must be the inlet valve at fault.
Thanks