Any advice on repairing a post on a shiplap fence where the fence rails are cut into the fence post. I can see you can get the post out because it is broken but upon replacing the post how can you get the rails in as the fence was original built from one end and the only way I see is to support the post with the full weight of both panels each side which will be very difficult. If you allow it to set you cant get the rails in???
Repairing Shiplap Fences
- Thread starter Razzo
- Start date
Sponsored Links
cut off the end set post and use these
http://www.screwfix.com/search.do?_...arris+rails&pn=1&pd=1&pi=1&cn=1&cd=1&x=14&y=7
http://www.screwfix.com/search.do?_...arris+rails&pn=1&pd=1&pi=1&cn=1&cd=1&x=14&y=7
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
