Replacement for Gardtec 300

[SMJ1963]

Hi Guys
I've had the above system installed for a good few years , the panel has now gone into tamper fault. The tamper circuit itself is still good , I have shorted the tamper circuit out on the pcb and the fault still remains , so I suspect faulty pcb.
That being the case can anyone advise me on a direct replacement for the 300 panel , or as near as possible so I don't have to totally rewire for a new system .

Thanks in advance.

Steve

 

[sparkymarka]

Have you put a link between 0v and sab tamper to rule out the bell box before replacing the panel ? Is there any remote keypads on this ?

 

[SMJ1963]

Yes I have put the link across sab tamper and 0v and it triggers the alarm , no there are no remote keypads

 

[Handymanjo]

If the control panel is faulty the closest control in size to the gardtec 300 series is scantronic 9448+ or Texecom veritas compact

 

[SMJ1963]

Thanks I'll check them out

 

[SMJ1963]

Thanks for your advice , Texecom Veritas on order