Replacing Climote with hive dual controller

[TM855521]

Hi
I’m looking to replace my Climote with a hive. I have tried it but can only get downstairs and hot water working with hive control can’t figure out how to get the upstairs wired to work or is it even possible to do it with hive. I’ve looked at other posts on this but can’t figure out. Any help would be greatly appreciated. This is the wiring for Climote. I have 3 zones hot water downstairs and upstairs.

 

[cross thread]

If you want separate heating you will need multizone for your hive.

 

[TM855521]

Thanks from your reply
Can I wire to have upstairs and downstairs come on from the hive together instead of splitting

 

[TM855521]

Do I need another hive thermostat and controller to operate 3 zones and how would I wire this from what I have .

 

[cross thread]

You could wire so both zones come on together.multi zone is a separate stat and another receiver that connects to same hub

 

[CountryFan]

Do I need another hive thermostat and controller to operate 3 zones and how would I wire this from what I have .

Can I ask why you want Hive? Drayton Wiser do a 3 channel kit which would suit your Installation.

 

[TM855521]

Just went with hive as liked how it looked and operated