In my property we have a Worcester bosch 8000 life system boiler and kingspan Albion 300l unvented cylinder.
We have a two zone ufh heating downstairs. 2 neostats v2 wired to a ufh4 and a neohub gen 3 so I can control via the app.
We also have a nest heatlink and wireless plug in Gem 3 thermostat. The nest controls my central heating and my hot water heating for the unvented cylinder.
Both systems work independently. Eg I can turn on only my ufh heating from via the neo app. Or I can turn on just the hot water from Google home or the ch. Or both. Or turn all 3 on via the two apps
This all works fine but I want to switch to a single heatmiser solution. I've been told I need to replace the heatlink with an rf switch v2 and the thermostat with a neo air v3. Is this the best solution or is there a better one?
If it is the best solution should it be completely straightforward process for any heating engineer to take the wires out the heatlink and put them in the corresponding terminals of the rf switch v2 or does some extra things need doing?
We have a two zone ufh heating downstairs. 2 neostats v2 wired to a ufh4 and a neohub gen 3 so I can control via the app.
We also have a nest heatlink and wireless plug in Gem 3 thermostat. The nest controls my central heating and my hot water heating for the unvented cylinder.
Both systems work independently. Eg I can turn on only my ufh heating from via the neo app. Or I can turn on just the hot water from Google home or the ch. Or both. Or turn all 3 on via the two apps
This all works fine but I want to switch to a single heatmiser solution. I've been told I need to replace the heatlink with an rf switch v2 and the thermostat with a neo air v3. Is this the best solution or is there a better one?
If it is the best solution should it be completely straightforward process for any heating engineer to take the wires out the heatlink and put them in the corresponding terminals of the rf switch v2 or does some extra things need doing?
