Retarded question about corner base unit

[SparrowHawk99]

Just wanted to know if this is right? I have over thought it and run the risk of getting it wrong

Any help?

No units yet fitted

 

[gregers]

looks ok to me.you might want to block off the gap on the unit behind the corner post,leaving it open is a magnet for stuff falling down there and being lost for ever just use a gash bit of mdf or the likes.

 

[foxhole]

Agree with gregers panel the corner cabinet too make it more secure.

 

[SparrowHawk99]

Guys only just not have gotten around to fitting this and the rest of the kitchen.

I'm finding the corner walls are not square and not sure how to fit them

 

[gregers]

well if its as bad as the pic,i think there is 2 ways of trying to sort it.
either leave it and do your mason mitre accordingly.on a splay rather then 90 degrees.
or try and cut/reduce the cabinets to suit,which means having to scribe the worktop as well.this may make the reduction of the worktop noticeable though?

 

[SparrowHawk99]

Ok well I decided just to try and make the most of the corner post and just about got away with fixing to the wall without cutting down the backs of the units, although had to pack out behind the l shape brackets, I'll upload some pics at some point