Retractive switch problem

Joined
10 Nov 2013
Messages
216
Reaction score
2
Location
West Midlands
Country
United Kingdom
Hi,
Wondering if anyone can help. I have this plate:

https://www.screwfix.com/p/varilight-xdqpg1-1-gang-powergrid-faceplate-white/46446

But the holes don’t line up with a standard meta back box:

https://www.screwfix.com/p/appleby-galvanised-steel-knockout-box-1g-25mm/79195

They sell this adapter which still doesn’t line up:

https://www.screwfix.com/p/varilight-z3pgrid1-1-gang-powergrid-gridplate/85638

This is the switch I want to use:

https://www.screwfix.com/p/varilight-z2dg102sw-10a-2-way-switch-white/29488

But If I can get a complete unit that will be fine too.

Can anyone help?

Thanks.
 
Sponsored Links
It's not an adaptor as such. It is part of the grid system which includes the switch you have linked.
It just so happens you have come across a single one. There are doubles - and more for the two-gang boxes.

Why do you not use a normal switch which will fit the back-box?
What is it you want to switch?
 
It’s for a electric door for opening up and closing down. Thought this would be the best solution? If not, please advise...
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top