Roller garage door contact

U also said the door contact was wired on to z2 on keypad ? Have u changed this ? How many keypads u got. Also if you press yes when in the keypad diagnostic menu it will show u the zone resistance so see what it is open and closed
Yes door contact was removed, how do you see the resistance? The C and O?
 
Has multimeter got buzzer function ?
Post photo of meter dial.
 
Last edited:

Attachments

  • 09CF8DB6-F1D2-4921-825A-4E368E10102D.jpeg
    09CF8DB6-F1D2-4921-825A-4E368E10102D.jpeg
    347.5 KB · Views: 77
Set meter to buzz
Put leads on both reds, meter should buzz tamper OK
Put leads on both whites magnet on contact meter should buzz,magnet off contact meter will not buzz.This proves contact working.
 
Press yes when u got the 2 c's on the screen and it will shouw u input 1 resistance, press d to go to input 2
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top