scantonic9448+

[philip huyton]

ok will do m8 let you know how i got on m8

 

[philip huyton]

if it sets what do i do m8

 

[philip huyton]

why does my external sound only the internal

 

[Handymanjo]

Does it set when the wires are twisted together ?
If internal sounder goes off then possible exit fault ?
Is zone 1 programmed as entry / exit ?

 

[philip huyton]

just change battery in box not external bell box

 

[philip huyton]

how do i know if zone 1 is programed to exit

 

[philip huyton]

i just replaced batt

 

[sparkymarka]

Have you ever actually used this alarm before ?

 

[philip huyton]

yes worked fine

 

[sparkymarka]

Point being ....only dedicated zone 7/entry exit zone ....zone 1 or 3 ( if programmed ) not zone 2 , so how did you use the alarm before without setting it off every time ?

 

[Handymanjo]

Odd that the door was on zone 2 and worked fine ?

 

[philip huyton]

twisted wires blue yellow still bleeping does not set alarm

 

[philip huyton]

Twisted wires still won't set think it could be wire

 

[Handymanjo]

Put wire link in zone 1
If alarm set's then cable fault

 

[philip huyton]

put link to zone 1 it set alarm off then could reset as buttons wont work had to take fuse out and batt now every time i recconect them the alarm sounds but cat turn off