scantonic9651; help please

[banny07]

hi every one..my first post. i am trying to wire an alarm panel. which is scantonic 9651. got pir which have six terminals -tive,+tive. n.c, and two temp terminals. could anyone please tell me where each terminal goes in the 9651 panel? and i also do i need to put a link in the zones, i am not using? thanks every one in advance.......

 

[djrock]

Hello, Re-read the manual. The answers to your questions are there (page 13 and 27). You don’t want to end up damaging the panel or programming it wrong.

 

[banny07]

Hello, Re-read the manual. The answers to your questions are there (page 13 and 27). You don’t want to end up damaging the panel or programming it wrong.

there are very poor instructions.

 

[Atilla]

Hello, Re-read the manual. The answers to your questions are there (page 13 and 27). You don’t want to end up damaging the panel or programming it wrong.

there are very poor instructions.

your stuffed if you cannot follow something as clear as that drawing.

 

[banny07]

i gave up in the end.........