Hello,
I'm helping a neighbour with an existing installation, the wires have been ripped out of the bellbox, I've connected the siren, however I'm struggling to locate the other wires.
I've attached PCB wires to help conversion.
Would anyone be able to assist? I've connected as best I can and I receive 'bell tamper' error however tried resetting through engineers menu and it's not working, therefore I believe it's wired wrong.
Please help.
From 'BELL' Feed:
Black -C2
Green - NC2
Yellow - TR
Red - 12V
Blue - 0V
-- Not connected:
White
Orange
Brown
Images here:
https://imgur.com/a/F0P95ub
Would this work?
http://www.moretonalarms.com/pdf_downloads/Bellbox_Wiring_MAS.pdf
AG6 Honeywell.
I'm helping a neighbour with an existing installation, the wires have been ripped out of the bellbox, I've connected the siren, however I'm struggling to locate the other wires.
I've attached PCB wires to help conversion.
Would anyone be able to assist? I've connected as best I can and I receive 'bell tamper' error however tried resetting through engineers menu and it's not working, therefore I believe it's wired wrong.
Please help.
From 'BELL' Feed:
Black -C2
Green - NC2
Yellow - TR
Red - 12V
Blue - 0V
-- Not connected:
White
Orange
Brown
Images here:
https://imgur.com/a/F0P95ub
Would this work?
http://www.moretonalarms.com/pdf_downloads/Bellbox_Wiring_MAS.pdf
AG6 Honeywell.
Last edited: